đ Overview
If you are looking for an easy way to streamline your payment process and modernize your checkout experience, DaySmart Payments powered by Stripe has everything you need. We are happy to have you aboard and look forward to helping you simplify and strengthen your payment experience!
đĄ Pro Tip:
For manual card entry users, please skip to Step 3: Run your First Transaction.
đ Step 1: Set up your Hardware
Learn how to unbox and connect your Stripe device to your network.
â ď¸ Before Setup:
Ensure your device is plugged in and charging for at least 30 minutes or is fully charged.
If the device loses power during updates, it can result in the device becoming corrupted and unable to process payments.
1ď¸âŁ Stripe Reader S700/S710
Included Components: Stripe Reader S700/S710, USB-C to USB-C charging cable, & Power adapter.
Click the arrow to learn how to set up your Stripe Reader S700/S710
Click the arrow to learn how to set up your Stripe Reader S700/S710
Connect the charging cable: Plug in the charger to ensure it stays powered during updates.
Power on the device: Hold the power button (on the right side) for a few seconds until the device turns on
Select your language
Select your country
Select your WiFi network: a network with a password is required.
If you have a Stripe reader S710 and want to use cellular only, click Continue with Cellular to bypass WiFi.
You will need to follow the steps below to enable cellular to take payments. If cellular isn't enabled in Stripe and connecting to WiFi is skipped, you will run into issues when taking a payment.
đś Enable Cellular for S710
Click the arrow to learn how to enable Cellular for your Stripe Reader S710
Click the arrow to learn how to enable Cellular for your Stripe Reader S710
Log in to the Stripe Dashboard.
On the left-hand side, click Payments.
From the drop-down, click Terminal.
Click the Locations subheading.
Select the Location with the device you'd like to enable cellular for.
Locate the cellular modem setting. It can be under Local configurations or Inherited configurations.
Click Override. You will need to hover your mouse over the pencil icon to see the word override.
On the Cellular connectivity pop-up, toggle Enabled to on, then click Update in the bottom right.
Acknowledge the billing notice by clicking Confirm.
Click Apply changes in the bottom right corner.
Restart the Stripe Reader S710 so it can update to pick up these changes.
Once the reader reboots, a message will appear saying âNetwork configuration has changed. Device will reboot to take effectâ. This confirms the reader has taken the new cellular configuration. The reader will reboot again.
Once the device has completed the reboot, you should see a cellular signal indicator in the top bar, and you're ready to take payments on cellular!
2ď¸âŁ Stripe Reader T600
Included Components: Stripe Reader T600, USB-C Charger & Wall Charger
Click the arrow to learn how to set up your Stripe Reader T600.
Click the arrow to learn how to set up your Stripe Reader T600.
Connect the reader to power by plugging the provided USB-C cable in the rear USB-C port. Route the cable around inside of the cable routing (see image).
Connect the opposite end of the USB-C cable to the provided power adapter and plug it into a power outlet.
If the device does not automatically power on, Use the power button on the back of the device to turn the screen on.
Once turned on, you will be prompted to select your language
Select your network from the list of networks
Enter WiFi Password, then tap the green circle with a checkmark
When there is a green checkmark next to your network name, tap Continue
Your reader will then load while it is connecting to the internet
Once your device is connected to the internet and the updates are completed, you will see a code pop-up on your screen. It will look something like this:
It's important to leave the device on this screen for the time being as you will need it to connect the device to the DaySmart software in the next steps.
âď¸ Step 2: Register your Reader in Dash
Learn how to add your card reader to Stripe and register your location with Dash.
â Add the Device to Stripe
âď¸ Note: If you are adding a new reader to an existing Stripe location, you do not need to create a new location. Skip to step 8 to register your reader directly under the existing location.
Log in to the Stripe Dashboard.
On the left-hand side, click Payments.
From the drop-down, click Terminal.
Click the Locations subheading.
Click the +Create Location button on the upper right-hand side.
Name it, enter the address, and save
Click on the location where this device will be used.
Click on the +Register Reader button on the upper right-hand side.
Enter the Registration Code that is showing on the WisePOS E screen, then click Next in the bottom right corner.
Enter a unique Reader label. This is optional, but it is recommended. then Save
It should show Registration Successful, applying updates. If it doesnât, then on the WisePOS E screen, press Back, then Back again
Wait for updates: The device will begin updating its software. This may take some time, so stay patient.
Where is my registration code?
The registration code is the three-word-prompt on the display of the reader. If you're not seeing this, use the steps below.
Swipe from left to right to open the menu.
Click Device Settings
Enter the admin PIN 07139
Click the second option, Generate Pairing Code.
Click the back button twice to get back to the DaySmart screen.
đ§ Email Your Location ID
Once the Setup has been completed, your Location ID will need to be sent to [email protected].
The location ID can be found above the register reader and edit location buttons in the location settings from the steps above. If you didn't leave that screen in stripe you're already in the right place. otherwise you can follow these steps again
On the left-hand side, click Payments.
From the drop-down, click Terminal.
Click the Locations subheading.
Click on the location where your device was set up with
đł Step 3: Run your First Transaction
Once Dash support emails letting you know that your location ID has been added, you're good to go! Just create a new appointment and get ready to check out. It's that easy! Click on the button for your software below to learn how to take a payment.
đ Step 4: Stripe Dashboard
Stripe offers some great insights into your credit card payments! If you're curious about how to log in and explore the dashboard, weâve got you covered. Dive in and discover all the helpful features!
â Frequently Asked Questions (FAQs)
Find answers to common questions or additional details that may not be covered in the main instructions.
How do I refund a payment?
Click the arrow to see the answer
Click the arrow to see the answer
We've put together a helpful article that walks you through the steps to refund payments in the software.
If I enable cellular, will all readers assigned to a location be billed for cellular?
Click the arrow to see the answer
Click the arrow to see the answer
Not necessarily, only cellular-capable readers assigned to a cellular-enabled location will result in a monthly charge.
All other non-cellular capable terminals, like the Stripe Reader S700, BBPOS WisePOS E, Stripe Reader M2, BBPOS WisePad 3, or Tap to Pay terminals, will not result in a monthly charge.
Example #1: Stripe Location has 2x S710 with cellular-enabled.
This will result in 2 cellular monthly charges. one for each device
Example #2: Stripe Location has 1x S710 and 1x S700 with cellular-enabled.
This will result in 1 cellular monthly charge for the S710.
Example #3: Stripe Location has 1x S700 and 1x WisePOS E and is cellular-enabled.
This will result in no monthly charges.
Can I have cellular and WiFi enabled?
Click the arrow to see the answer
Click the arrow to see the answer
Yes, if you have cellular enabled, you can still have a WiFi connection on the device. The device will use WiFi as the main connection type. If the WiFi connection becomes unstable, the Stripe Reader S710 will switch to your cellular connection to ensure you don't lose service during a payment. No need to manually switch internet connections.
If you have unlimited cellular enabled as a backup, you'll be charged $10per device, per month, it is enabled even if only the WiFi connection was used. This is just like an unlimited data plan with your cell phone.
đŹ Contact Us
Issues with setting up the device or running a transaction, and still have questions? Click on the button below for different support options!